Road Pavement Design in One of Oversea Sewage Treatment Plant

Journal: Journal of Building Technology DOI: 10.32629/jbt.v2i1.89

Chengbo Zhang, Cheng Hu, Qiaolin Liu, Zheng Wu

PowerChina Chengdu Engineering Corporation Limited, CEC

Abstract

Three methods are used for Road Pavement Design for access road and internal roads to Dasherkandi Sewage Treatment Plant in Bangladesh, the method, standards and ESA for design of the road are introduced, the issues of design standard for Sewage Treatment Plant, traffic increase rate and seal coat for asphalt concrete of the road are discussed, some of the propose is made to minimize different understanding in execution of the contract, it provides necessary references for similar oversea project in similar country.

Keywords

Sewerage Treatment Plant; access road and internal roads; pavement design; standard

References

[1] Pavement Design Guide for Roads and Highway Department, Government of the Peoples' Republic of Bangladesh, Ministry of communications, Roads and Railway Division, 2005.
[2] Road Pavement Design Manual, LGED, 1999.
[3] Road Design Standard, Rural Road, LGED, JICA, 2005.
[4] Standard Tender Documents Volume 3 of 4 Technical Specification, May 2001; Technical Proposal Vol. 2 of Contract documents.
[5] Urban Drain Design Manual, Hydraulic Engineering Circular No. 22, third edition, FHWA-NHI-10-009, September 2009.

Copyright © 2020 Chengbo Zhang, Cheng Hu, Qiaolin Liu, Zheng Wu

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License